July 2025

China’s greening steel industry signals an economic reality check for Australia

Cristoph Nedopil, Director Griffith Asia Institute, Griffith University Australia has flourished as an export powerhouse for decades. Much of this prosperity has been driven by the nation’s natural endowment with two important raw products for producing steel the traditional way: iron ore and metallurgical coal. Worth more than A$100 billion in 2024, Australia’s iron ore shipments to China make up about 55% of everything we export there. But a transformation has been taking place in China’s steel industry, which is under intense pressure to decarbonise. Earlier this year, Beijing formally expanded its national emissions trading scheme to cover steel production. And just this month, it issued another decree requiring steelmakers to increase their share of green energy in steel production. Prime Minister Anthony Albanese’s recent visit to China may have looked like a celebration of normalised diplomatic or trade ties. Behind the scenes was a quiet but critical economic pivot. Australia’s economic future depends on whether it can green its exports fast enough to meet the decarbonisation needs of its biggest market. A greener China In China, no new permits for coal-based steelmaking appear to have been issued since early 2024. However, China has been approving new, greener steelmaking capacity, using electric arc furnace (EAF) technology, the main low-emissions technology in steel. These furnaces use high-voltage electric arcs, powered ideally by green energy, to melt scrap steel or what’s known as direct reduced iron (DRI). Through that process, they limit carbon emissions by reducing the use of thermal coal for electricity and metallurgical coal for iron making in blast furnaces. In total, China has now installed enough electric arc furnaces to produce more than 160 million tonnes of steel annually. That’s about the same as the total steel output of Japan and the United States combined. China’s current 10% share of steel production from electric arc furnaces still remains below the country’s 15% target. But […]

Does AI actually boost productivity? The evidence is murky

-John Whittle, Director, Data61, CSIRO There’s been much talk recently – especially among politicians – about productivity. And for good reason: Australia’s labour productivity growth sits at a 60-year low. To address this, Prime Minister Anthony Albanese has convened a productivity round table next month. This will coincide with the release of an interim report from the Productivity Commission, which is looking at five pillars of reform. One of these is the role of data and digital technologies, including artificial intelligence (AI). This will be music to the ears of the tech and business sectors, which have been enthusiastically promoting the productivity benefits of AI. In fact, the Business Council of Australia also said last month that AI is the single greatest opportunity in a generation to lift productivity. But what do we really know about how AI impacts productivity? What is productivity? Put simply, productivity is how much output (goods and services) we can produce from a given amount of inputs (such as labour and raw materials). It matters because higher productivity typically translates to a higher standard of living. Productivity growth has accounted for 80% of Australia’s income growth over the past three decades. Productivity can be thought of as individual, organisational or national. Your individual productivity is how efficiently you manage your time and resources to complete tasks. How many emails can you respond to in an hour? How many products can you check for defects in a day? Organisational productivity is how well an organisation achieves its goals. For example, in a research organisation, how many top-quality research papers are produced? National productivity is the economic efficiency of a nation, often measured as gross domestic product per hour worked. It is effectively an aggregate of the other forms. But it’s notoriously difficult to track how changes in individual or organisational productivity translate into national GDP per hour worked. […]

DroneShield's current in-house production facility in central Sydney

DroneShield to invest as it expands manufacturing capacity

DroneShield will invest an initial A$13M in a major new R&D and manufacturing facility, triple the size of its current facility, as it expands its annual manufacturing capacity to $2.6BN by the end of 2026. The company’s largest facility is expected to open in December 2025 and will feature advanced in-house production, testing and warehousing capabilities. The existing production floor in Alexandria,central Sydney will be converted into an additional R&D area for the Company, resulting in a 5,530sqm total R&D area. It follows DroneShield securing a $61.6M European military contract followed shortly by $9.7M million Latin American and $11.7M Five-Eyes R&D deals. ‘In response to rising threats and multiple wars taking place across the globe, Australia’s allies are increasing investment in modern defence capabilities. We are stepping up to meet this demand by investing in state-of-the-art facilities here and abroad, and in sovereign Australian skills development to provide the most modern and effective counter-drone capabilities in the world. Our new facility in Alexandria will epitomise the value Australian engineering can bring to a changing geopolitical landscape’, said DroneShield CEO Oleg Vornik. R&D and Manufacturing Capacity Expansion DroneShield is committing to invest $13 million in a significant R&D and manufacturing capacity expansion New dedicated 3,000sqm of own production space (3x the floorspace of the current production facility) Addition of 2,500sqm to the R&D area in its headquarters, for engineering and lab space Together with planned expansions to its Australian contract manufacturing, and plans to set up contract manufacturing in Europe and the US, the current $500 million annual manufacturing capacity is estimated to expand to $2.4 billion, by the end of 2026 The expansion in Australia is concurrent with DroneShield’s European and US manufacturing initiatives, against the backdrop of record global demand The $13 million amount refers to 5 years of initial […]

Robotics, automation and supply chain challenges to headline at Sydney-based industry conferences

CeMAT Australia and Industrial Transformation Australia will host the largest gathering of professionals in manufacturing, warehousing and logistics. The Dome at Sydney Olympic Park will host the co-located CeMAT Australia 2025 and Industrial Transformation Australia 2025 events from Tuesday 22 to Thursday 24 July. Over three days attendees will have access to a range of expert-led sessions from local and international presenters, and will be able to connect with 200 exhibitors across both events. The Australian Forklift Championships will be hosted as part of CeMAT Australia with the official battle taking place on Wednesday 23 July and additional corporate teams and live demonstrations happening on Thursday 24 July. Agenda highlights for CeMAT Australia 2025: Opening keynote – State of the Nation | Julian Brancaccio, Supply Chain & Logistics Association of Australia Special unveiling – Rise to New Dimensions: Introducing AeroBot – the Future of AI-driven Fulfilment | Michael Kemeny, KNAPP Australia Green is the new lean – Why Carbon-Smart Supply Chains is the Next Competitive Advantage | Claire Bull, Extolla View the full agenda here: https://www.cemat.com.au/agenda Agenda highlights for Industrial Transformation Australia 2025: Keynote – Megatrends shaping the next decade of Advanced Manufacturing Australia’s big move in the evolution of industry 4.0 | Henrik von Scheel, Industry 4.0 Originator Keynote – The Future of Manufacturing: Operate to Grow | John Broadbent, Realise Potential Robotic Picking & Handling Using Vacuum Technology | Michal Vigoda, Schmalz Australia View the full agenda here: https://www.industrialtransformation.com.au/agenda 2025 Exhibition CeMAT Australia, Industrial Transformation Australia, and the Processing & Packaging Pavilion – powered by APPMA, will host over 200 exhibitors showcasing the latest innovations in intralogistics, robotics and automation, warehousing, supply chain management, and materials handling. The events will also feature leaders in advanced manufacturing, and distributors and importers of packing and processing machinery serving key sectors […]

Rockwell Automation’s ROKLive 2025 brings the connected enterprise to life on the Gold Coast

Manufacturing, mining, utilities, food and beverage, and broader industry learn from practical hands-on displays at flagship event ROKLive 2025 will include more than 50 hands-on lab sessions designed to enhance knowledge and skills in topics like artificial intelligence, digital transformation, machine performance optimisation, and operational efficiency improvements. Rockwell Automation, the world’s largest company dedicated to industrial automation and digital transformation, has unveiled its programme for ROKLive 2025 on the Gold Coast, from July 29-31. The event will bring more than 500 industry professionals together to explore innovative solutions to complex production challenges and to discuss strategies for achieving greater efficiency, resilience, agility, and sustainability. “ROKLive is our biggest event in Australia and New Zealand, and what really sets it apart are the hands-on lab sessions where participants can gain practical experience with the latest technologies. This year we have more than 50 of these across the three days,” said Adrian Giecco, regional director, South Pacific, Rockwell Automation. “Other highlights include the Connected Show Floor, an expanded and dynamic exhibition space featuring the latest Rockwell Automation and PartnerNetwork™ solutions, as well as the FIRST Robotics League Competition,” said Giecco. The FIRST Robotics League Competition will see aspiring young engineers and programmers demonstrate their skills in robotics, highlighting the future of STEM and Automation in Australia and New Zealand. New product launches ROKLive 2025 will also see the launch of a series of new Rockwell Automation products, which will be displayed for the first time in Australia: ControlLogix 5590, a Next Gen Controller, and one of the most significant upgrades in a decade to one of Rockwell Automation’s core products, designed for higher performance, enhanced redundancy, expanded motion/network capabilities, and built-in safety and security. PointMax I/O,built from the ground up leveraging learnings from more than 20 years of development, Pointmax I/O is a […]

Allegro Energy positions its proprietary LDES as a clean power backbone for data centres

As data centre expansion accelerates to meet the demands of AI, cryptocurrencies, and cloud services, Allegro Energy has announced the relevance and applicability of its cutting-edge long duration energy storage (LDES) technology in enabling scalable, sustainable energy solutions tailored to the unique needs of modern data centres. With data centres operating on consistent, high-load profiles, they are uniquely positioned to benefit from a clean power strategy that combines renewable generation with long duration energy storage. Allegro Energy’s modular, scalable, and environmentally friendly battery systems present a breakthrough solution that overcomes the prohibitive cost, scalability and sustainability challenges associated with traditional lithium-ion or vanadium-based systems. Modularity & Scalability: Allegro’s LDES systems are designed to grow in parallel with a data centre’s needs. This allows incremental investment and deployment, a model that is ideal for both hyper-scale facilities and edge data centres. Renewable Compatibility: The system pairs seamlessly with solar and wind energy, helping data centres navigate grid volatility and peak pricing while advancing toward net-zero carbon targets. Climate-Friendly Storage Chemistry: Unlike conventional technologies, Allegro’s water based electrolyte is not resources constrained, offering a low-impact alternative that can be safely deployed at scale. Consistent Load Advantage: Data centres’ constant, 24/7 demand profiles make them ideal candidates for firming intermittent renewables with a storage option that delivers dependable performance without excessive cycling costs. “The exponential growth of generative AI, cloud computing, and digital services has made energy a critical chokepoint in data infrastructure,” said Dr. Thomas Nann, CEO of Allegro Energy. “We believe the future of high-performance computing does not need to come at the cost of the planet. With our technology, data centres can be powered entirely by renewables, supported by reliable, cost-effective long-duration storage.” Allegro Energy’s proprietary, locally manufactured microemulsion electrolyte technology has been widely recognised as a critical advancement in […]

Nexobot selected as finalist in Australia’s first AI and Robotics sprint

Nexobot has been selected as one of six finalists in the inaugural Propel-AIR program, Australia’s first dedicated AI and Robotics Sprint. The Melbourne logistics company will now compete for the opportunity to work with and alongside MassRobotics in Boston, the global epicentre of robotics innovation, with its low-cost parcel sorting platform. Proven Technology with Growing Demand Nexobot enables regional and small-scale logistics operators to automate parcel sorting for the first time through the world’s lowest-cost robotics solution. “We’re not a deep-tech company—we’re a wide-tech company,” says Dominic Lindsay, Founder and CEO of Nexobot. “Our goal isn’t to serve the top 1%, it’s to give thousands of small Australian businesses access to robotics that save labour, improve accuracy, and enhance safety from day one.” While established players deploy sorting robots achieving 1,000+ parcels per hour with 99% accuracy, these solutions require substantial infrastructure investments and technical expertise. Nexobot’s breakthrough delivers comparable performance over 99.9% accuracy through simple, modular systems that regional operators can actually afford and implement. The system cuts worker walking distance from 40 metres per carton to just 6 metres, while boosting sorting throughput from 80 items per hour manually to 500+ items per hour automated. Seasonal Peak: Premium vs Pay-per-Carton Major logistics providers use premium robotics solutions to handle seasonal peaks. These systems typically require million-dollar investments and dedicated technical teams. Nexobot’s pay-per-carton model eliminates capital barriers, making automation accessible to 250+ regional logistics operations across Australia. Nexobot’s first live deployment operates in regional Victoria out of Warragul, where the system delivers measurable improvements in productivity, safety, and sorting accuracy. Commercial Traction Regional logistics operations represent over 250 potential deployments in Australia alone, that mirror the successful Warragul implementation. Additionally, developing economies across Southeast Asia, Africa, and Latin America offer strong demand where traditional automation remains commercially unviable. […]

EPOC Enviro launch lean and nimble SAFF®10 PFAS remediation technology

Australian company EPOC Enviro today launched the SAFF®10, a compact new PFAS remediation technology developed in response to industry demand and engineered for sustainability. The SAFF®10 joins EPOC’s existing suite of SAFF® PFAS remediation technologies, and is ideal for sites with limited space, accessibility issues, and low or intermittent water flows. Surface Active Foam Fractionation (SAFF®) represents a sustainable approach to PFAS remediation, where a combination of sustainable engineering and biomimicry using air bubbles is used to rapidly ‘foam out’ more than 99 per cent of target PFAS molecules, enabling treated water to be safely returned to the environment. “PFAS pollution doesn’t always happen on a grand scale, and neither should the solution. As the smallest system in our SAFF family, the SAFF®10 is built for places where other systems simply won’t fit,” said EPOC Enviro Managing Director Peter Murphy. “With a trim footprint of just 2.3m x 4.6m, the SAFF®10 is an ‘unboxed’ versatile solution that can be housed in an existing room; positioned into a 20ft container; or mounted on a trailer for sites requiring a mobile solution,” he said. “This versatile alternative runs on EPOC Enviro’s award-winning SAFF® process, so remediators know they’re getting a proven and effective solution that removes target PFAS contaminants without the waste: same clean water outcome, smaller environmental footprint.” The SAFF®10 can comfortably process 75,000 litres a day, even in complex water chemistries and includes both primary and secondary foam fractionation for superior PFAS capture. It’s an ideal technology for remediating target PFAS contaminants in any number of applications including landfill leachates, groundwater, trade waste, mobile and fixed foam deluge system decontamination, spill incident waters, and more. Key features: Throughput up to 10m³/hr Modular, skid-based system Includes dosing capability for enhanced uptake of short chain PFAS contaminants Robust technology capable of managing […]

Why “less is more” may be the trick on ESG

By Paul Eastwood, Managing Partner of Argon & Co As pressure builds around climate action and ESG performance, organisations are feeling the heat. Regulators, investors, customers, and employees are demanding more transparency, faster progress, and deeper commitments. And in a world increasingly flooded with ESG frameworks, standards, and compliance checklists, the instinctive response can be to launch a flurry of initiatives across carbon, diversity, packaging, and human rights. To launch long lists of actions to meet multiple compliance requirements, satisfy different stakeholder groups, follow perceived best practices… But trying to do everything at once rarely delivers the desired impact. This is especially the case for mid-sized organisations, which often lack the dedicated ESG teams or specialised systems to manage the growing volume of expectations. Instead of improved ESG outcomes, doing too much can often lead to fragmented efforts, limited return on investment, and internal fatigue. Teams become overburdened. Leadership loses visibility. The pace of progress slows. Accountability is diluted. And so, even if it may feel counterintuitive, there’s actually a growing case for doing less when it comes to ESG, in order to gain more. Because by narrowing focus to the ESG areas that matter most, organisations can align sustainability with business priorities and deliver outcomes that are clear, credible, and lasting. This is often both more manageable, and also more effective. So how exactly can organisations identify a smaller set of high-impact areas in which to direct ESG efforts that align with business relevance, operational capability, and stakeholder value? What moves the needle, matters The trick is to remember that not all ESG initiatives are created equal. The Pareto Principle – the idea that 20 percent of efforts drive 80 percent of results – dictates that a handful of well-chosen actions can deliver the lion’s share of impact. This […]

News Ticker

July 2025